P5514B-70M/P5514B-70M-EP
Users Manual
2
Specifications
Operating Fluid Compatibility
The standard system uses Viton O-ring seals and is for use with a wide range of fluids.
Compatible fluids include, but are not limited to, mineral oils, water, and solvents. For
compatibility with phosphate esters, a model with ethylene propylene seals is available. See
Table
.
Table 1. Operating Fluid Compatibility
1. Rotate the reservoir dust cover 1/2 turn.
2. Fill reservoir approximately 3/4 full with the appropriate fluid.
3. Rotate dust cover back to cover reservoir.
W
Caution
To avoid damage to the instrument, check the quality of the operating fluid during
use. If the fluid becomes discolored, cloudy or particles appear in the reservoir,
drain and flush the system with clean fluid.
Pressure Range
70 MPa (10 000 psi)
Pressure Connections
M20
Adapters Provided
1/4 NPT Female (quantity 2), 1/2 NPT Female, 1/4 BSP Female, 1/2 BSP
Female
P5514B-70M Seal Material
Viton®
P5514B-70M-EP Seal
Material
Ethylene Propylene
Screw Press
Displacement
20 cm
3
(1.2 in
3
)
Reservoir Volume
75 cm
3
(4.5 in
3
)
Fine Adjustment
Displacement
0.06 cm
3
(0.004 in
3
)
Size (H,W,D)
150 x 330 x 280 mm (6 x 3 x 11 in)
Weight
5 kg (11 lb)
Safety
2014/68/EU, Pressure Equipment Directive (PED) - Article 4, Paragraph 3
Model
O Rings
P5514B-70M
Viton
P5514B-70M-EP
Ethylene Propylene
1.888.610.7664
Fluke-Direct
.com
