Fluke 411D User Manual Download Page 7

6/7

Pythagoras

See drawing 

G:

Â

Press key 

8

 three times.

The Pythagoras symbol appears on the
display.

Â

Press key 

4

 and measure the first distance

(diagonal measurement).

Â

Press key 

4

 and measure the second distance

(horizontal measurement).

The device displays the result in the summary 
row and the respective measured distance to the 
next measurement in the second row.

Troubleshooting

Â

If the message 

Error

 does not disappear

after switching on the device repeatedly,
please contact the retailer.

Â

If the message 

InFo

 appears with a number,

observe the instructions in the following
table.

Technical data

* under favorable conditions (good target 
surface, room temperature) up to 10 m (33ft). 
Under unfavorable conditions such as bright 
sunlight, a very weakly reflecting target surface 
or large temperature fluctuations, the deviation 
can rise by ± 0.25 mm/m (±0.01 in) for 
distances over 10 m (33 ft).

Electromagnetic compatibility 
(EMC)

Despite the compliance with all requirements of 
the corresponding directives and norms, a 
disturbance of other devices is possible.

No.

Cause

Remedy

204 Calculation error

Perform measurement 
again.

252 Temperature too high

Let the device cool 
down.

253 Temperature too low

Warm the device up.

255 Reception signal too 

weak, measuring time 
too long

Change target surface 
(e.g. white paper).

256 Input signal too high

Change target surface 
(e.g. white paper).

257 Measuring error, too 

much background light

Shadow the target 
area.

258 Measurement outside 

of the measuring range

Mind the range.

260 Laser beam interrupted Repeat the 

measurement.

Range

0.1 m to 30 m
0.33 ft to 100 ft

Measuring accuracy (2 

σ

Typ.: ± 3.0 mm*
± 0.12 in*

Smallest unit displayed

1 mm (1/16 in)

Laser class

2

Laser type

635 nm, < 1 mW

Automatic switch-off

after 180 s

Continuous measuring

yes

Addition/Subtraction

yes

Area

yes

Volume

yes

Pythagoras

yes

Unit switching

yes

Dimension (H x D x W)

118 x 50 x 26 mm
4.65 x 1.97 x 1.02 in

Battery durability
(2 x AAA)

up to 3000 
measurements

Weight

100 g
3.22 ounce

Temperature range:
- Storage
- Operation

-25°C to +70°C
(-13°F to +158°F)
0°C to +40°C
(32°F to +104°F)

Warning

Possible disturbance of other devices
(e.g. safety equipment, medical equipment) 
due to electromagnetic radiation!

Â

Observe the safety instructions of the respective 
devices.

Summary of Contents for 411D









Reviews: