Clamp Meter
Firmware Update (377 FC/378 FC)
17
Data Logging (377 FC/378 FC)
The Fluke Connect™ app enables you to log the data
measurements. This app shows measurements from the
connected Clamp on your smartphone or tablet display. The app
also saves the measurements to the Fluke Connect Cloud™
storage and shares the information with your team.
Note
The logging interval is set in the Fluke Connect app.
Logging is not available for the inrush and line-to-line
measurement modes.
To log measurements:
1.
On the Clamp, push
I
for >2 s.
The memory icon indicates how much memory is available.
2.
On the Clamp, push
I
for >2 s to stop logging.
Clear Memory (377 FC/378 FC)
See
Firmware Update (377 FC/378 FC)
Firmware updates are available for Clamps that have the
Fluke Connect™ feature. The Fluke Connect mobile app shows a
notification if a firmware update is available when the unit is
connected to the app.
To update:
1.
Make sure the Product has at least 50 % battery power
available.
2.
Make sure you download all the logged data before you
update the firmware.
3.
In the app, tap
Update
to start the firmware update to the
Product.
Firmware Version
The firmware version for the Clamp is found in the Maintenance
Mode.
To enter Maintenance Mode:
1.
Turn off the Clamp.
2.
Push and hold
e
as you turn the control knob to
V
.
The Clamp goes into the option mode.
3.
Push
B
until
nmAt nm0d
shows on the display.
4.
Push
M
.
All LCD segments turn on.
5.
Release
e
.
All LCD segments continue to show on the display.
6.
Press
e
again to show the firmware version.
