377/377 FC/378/378 FC
Users Manual
10
Power-On Options
Power-on options allow you to customize the controls:
•
Turn off/turn on audible beeper
•
Turn off/turn on auto backlight
•
Turn on/turn off auto power shutoff
•
Clear Logging Memory
•
Set PQ Sensitivity Level
To select a power-on option:
1.
Turn off the Clamp.
2.
Push and hold
e
as you turn the control knob to
V
.
The Clamp goes into the option mode.
Note
Anytime you release
e
the Clamp exits the option
mode but retains any changes to the settings.
3.
Push
B
to go through the options.
4.
Push
M
to change a setting.
5.
Release
e
to exit the options mode.
All power-on options are canceled when you turn off the
Clamp with the exception of PQ Sensitivity setting.
Option
Display
Beeper Enabled
bEEP On
Beeper Disabled
bEEP OFF
Auto Backlight On
(Backlight turns off after 2 minutes of no use)
8CLt On
Auto Backlight Off
(Backlight stays on)
8CLt OFF
Auto Power On
(Clamp powers off after 20 minutes of no use)
AUtO On
Auto Power Off
(Auto Power Off is disabled)
AUtO OFF
Clear Logging Memory
CLr
PQ Sensitivity
LEU
HI
LEU
nmEd
LEU
L0
