3210-PR-TF English Instruction Sheet
Page 4
Specifications
Electrical Characteristics
Measurement Range
20 to 1000 A (with a crest factor
≤
3)
Frequency Range
40 Hz to 5 kHz
Accuracy (@ 25 °C)
±1 % of reading
Linearity (10 % to 100 % of range)
±0.2 % of reading
Temperature Coefficient
±0.05 % of reading per °C
Position Sensitivity (with cable >25
mm from the coupling)
±2 % of reading
External Field (with cable >200 mm
from the head)
±1 % of reading
Working Voltage (see Safety
Standards)
1000 V ac rms or dc
General Characteristics
Probe Cable Length
24 in. (610 mm)
Probe Cable Diameter
0.3 in. (8 mm)
Transducer Bend Radius (min)
1.5 in. (38.1 mm)
Output Cable
2 core screened, double insulated, 3
meters long
Output Connector
LEMO 6 pin male connector
Operating Temperature Range
-4 to +158
°
F (-20 to +70
°
C) (the
temperature of the conductor under test
shall not exceed 176
°
F /80
°
C)
Storage Temperature Range
-40 to 176
°
F (-40 to +80
°
C)
Operating Humidity
15 % to 85 % (non condensing)
Altitude
max 6562 ft. (2000 m)
Degree of ingress protection
IP40 (IEC 60529)
Safety Standards
IEC 61010-1: Pollution Degree 2 / IEC 61010-2-032: 1000 V CAT III
Use of the Probe on uninsulated conductors is limited to 1000 V under CAT III
installations and 600 V under CAT IV installations ac rms or dc and frequencies
below 1 kHz. Note that the safety rating for the output to ground is limited to 30 V ac
rms or dc by the connector specified.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one
year from the date of purchase. This warranty does not cover fuses, disposable
batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend
any other warranty on Fluke’s behalf. To obtain service during the warranty period,
contact your nearest Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a description of the
problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99