ScopeMeter
®
Test Tool
How to Use the Test Tool
23
c. Select
On
to show the reference waveform.
This can be:
•
last used reference waveform (if not available no reference waveform will be shown).
•
envelope waveform if the persistence function Envelope is on.
d. Select
Recall
to recall a saved waveform (or waveform envelope) from memory and use it
as a reference waveform.
e. Select
New
to open the NEW REFERENCE menu.
If you selected
New
continue at step 4, if not, go to step 5.
4. Use
h i
to select the width of an additional envelope to add to the momentary waveform.
5. Press
E
to store the momentary waveform and show it permanently for reference. The
display also shows the actual waveform.
To recall a saved waveform from memory and use it as a reference waveform, see
Screens with Associated Setups
Example of reference waveform with an additional envelope of
±
2 pixels:
black pixels: basic waveform
gray pixels:
±
2 pixels envelope
1 vertical pixel on the display is 0.04 x range/div
1 horizontal pixel on the display is 0.04 x time/div.
1.888.610.7664
Fluke-Direct
.com