Reference Pressure Gauge
Safety Information
3
•
Replace the batteries when the low
battery indicator shows to prevent
incorrect measurements.
•
The battery door must be closed and
locked before you operate the Product.
W
Caution
To prevent possible damage to Product or to
equipment under test:
•
The display reads “OL” when the
pressure source is above the Product
range limit. The pressure source must
immediately be removed.
•
Do not apply more than the maximum
torque specified. Maximum torque
specified is 20 Nm = 15 ft-lb.
Special Conditions for Safe Use
Misuse
If the Product is exposed to overpressure or sudden
physical shock (such as being dropped) examine it for
damage that can cause a safety issue. If necessary, send
the Product for examination to Fluke. Refer to the How to
Contact Fluke Calibration section.
W
Warning
To prevent possible fire, or personal injury:
•
Do not use the Product with flammable
substances.
•
The Product is intended for installation
only in locations with protection against
the entry of solid unwanted objects or
water that can compromise safety.
1.888.610.7664
Fluke-Direct
.com