HF132PEN_v0501_05
Page 6
Configuration of the unit
The F132-P was designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F132-P according to your specific requirements.
SETUP includes several important features, such as K-factors, measurement units, signal selection
etc. All setting are stored in EEPROM memory and will not be lost in the event of power failure or a
drained battery.
To extend the battery-life time, please make use of the power-management functions as described
in chapter 3.2.3.
Display information
The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,
status information and key-word messages.
A backup of the total and accumulated total in EEPROM memory is made every minute.
Receipt information
After each completed batch a receipt is printed on an external device. Additional receipts can be
printed on demand.
Below example shows a printed receipt. The arrows indicate the items that can be configured. For
configuration details and options see chapter 3.
====================
FLUIDWELL F132P
--------------------
Date: 01/01/10
Time: 12:34:56
Unit ID: 0
Deliv. No: 7
Deliv. total:
546 L
Accum. total:
2865668 L
====================
Fig. 2: Typical layout of a printed receipt
Options
The following options can be delivered: intrinsic safety, mechanical relay or active outputs, power-
and sensor-supply options, LED backlight, panel-mount, wall-mount and weather-proof or flame
proof enclosures.
Certain options may rule others out: For instance, it is not possible to combine an integrated AC
power supply option with an intrinsic safety option. For more information contact your supplier.
Configurable header
Timestamp upon
batch delivery
Tagnumber of unit
Delivered total
Number of
completed batches
Adjustable
number of
blank rows
Accumulated total
