Fluidwell F127-P-EL-TA Operation Manual Download Page 42

Page: 42 / 52

HF127PEN_EL_TA_v0501_04

Page 42

APPENDIX A: TECHNICAL SPECIFICATION

Display

Type

High intensity reflective numeric and alphanumeric LCD, UV-resistant.

Digits

Seven 17mm (0.67") and eleven 8mm (0.31"). Various symbols and measuring units.

Refresh rate

User definable: 8 times/sec - 30 secs.

Type ZB

Transflective LCD with green LED backlight. Good readings in full sunlight and darkness.
Note: only available for safe area applications.

Power requirements: 12-24V DC + 10% or type PD, PF, PM. Power consumption max. 1 Watt.

Enclosures

General

Control Keys

Painting

Die-cast aluminum or GRP (Glassfibre Reinforced Polyamide) enclosure with Polycarbonate

window, silicone and EPDM gaskets. UV stabilized and flame retardant material.

Three industrial micro-switch keys. UV-stabilized silicone keypad.
Aluminum enclosure only: UV-resistant 2-component industrial painting.

Panel-mount enclosures

Classification

Panel cut-out

Type HC

Type HB

Dimensions: 130 x 120 x 60mm (5.10" x 4.72" x 2.38") – LxHxD.
IP65 / NEMA4X

115 x 98mm (4.53" x 3.86") LxH.

GRP panel-mount enclosure

Aluminum panel-mount enclosure

Field/wall-mount enclosures

Classification

Aluminium enclosures

Type HA

Type HM

Type HN

Type HO

Type HP

Type HT

Type HU

Type HV
Type HZ

GRP enclosures

Type HD

Type HE

Type HF

Type HG

Type HJ

Type HH

Type HK

ABS enclosure

Type HS

Dimensions: 130 x 120 x 75mm (5.10” x 4.72” x 2.95”) – LxHxD.

IP67 / NEMA4X

Drilling: 2x PG9 – 1x M20.

Drilling: 2x M16 – 1x M20.

Drilling: 1x M20.

Drilling: 2x M20.
Drilling: 6x M12.

Drilling: 1x ½”NPT.

Drilling: 3x ½”NPT.

Drilling: 4x M20
No drilling.

No drilling.

Drilling: 2x 16mm (0.63”) – 1x 20mm (0.78”).

Drilling: 1x 22mm (0.87”).
Drilling: 2x 20mm (0.78”).

Drilling: 3x 22mm (0.87”).

Drilling: 6x 12mm (0.47”).

Flat bottom - no drilling.

Silicone free ABS enclosure with EPDM and PE gaskets. UV-resistant polyester keypad.

(no drilling)

Operating temperature

Operational

-40°C to +80°C (-40°F to +176°F)

Intrinsically Safe

-40°C to +70°C (-40°F to +158°F)

Power supply

Type PB

Lithium battery - life-time depends upon settings - up to 5 years.

Type PC

Intrinsically Safe lithium battery - life-time depends upon settings - up to 5 years.

Type PD

8-24V AC / DC + 10%. Power consumption max. 10 Watt.

Intrinsically safe: 16-30V DC; power consumption max. 0.75 Watt.

Type PF

24V AC / DC + 10%. Power consumption max. 15 Watt.

Type PL

Input loop powered from sensor signal 4-20mA (type A, non IS).

Type PM

115-230V AC + 10%. Power consumption max. 15 Watt.

Type PX

Output loop powered: 8-30V DC. Power consumption max. 0.5 Watt.

Note PF / PM The total consumption of the sensors`, backlight and outputs may not exceed 400mA@24V.

Note I.S. applications For intrinsically safe applications, consult the safety values in the certificate.

GENERAL

Summary of Contents for F127-P-EL-TA





















































Search results

Summary of Contents for F127-P-EL-TA

Reviews:

Related manuals for F127-P-EL-TA

Brands by name

Popular brands

Fluidwell F127-P-EL-TA, Operation Manual

Search results

Summary of Contents for F127-P-EL-TA

Reviews:

Related manuals for F127-P-EL-TA

Brands by name

Popular brands