fluidra Certikin iSAVER+ DVSD03, Manual

Page: 3 / 12

3
About the product
The swimming pool pump frequency inverter is designed to allow the user to control and vary the operational speed of the
swimming pool pump in order to gain energy and cost saving efficiencies.
The product benefits from multiple time and speed settings, which can be used manually or automated through timers. The easy to
read display shows current operational settings and also provides power usage information for the setting in use.
Two models are available: DVSD03 (Inverter output 1.1kW) for pumps up to 1HP, and DVSD04 (Inverter output 2.2kW) for pumps
up to 2HP –
ENSURE YOU ARE USING THE CORRECT MODEL.
WARNING
This device is designed for use ONLY with swimming pool pumps with a permanent split
capacitor motor. Fig 1 below shows a wiring schematic for a typical single speed swimming pool pump motor
Running capacitor
Main
Winding
Auxiliary
Winding
Fig 1: Typical single speed swimming pool pump motor schematic
WARNING
This device IS NOT COMPATIBLE WITH:
a) Single phase motors with centrifugal switch
b) Motors with start relays or switches
c) Series or DC motors
d) Motors with faults in their rotors or capacitors
e) Shaded-pole asynchronous motors
WARNING
An RCD with a rated residual current not exceeding 30Ma must be used with this device.
If you are unsure of the compatibility of your swimming pool pump with this device, please contact your pump
supplier before proceeding.