background image

The  

shared   passphrase

  is   a   secret   that   must   be   shared   only   among   the 

Videomesh forming a single network. Every Videomesh that does not have the 
right   passphrase   will   not   be   able   to   communicate   with   the   routers   of   your 
network.   Different   passphrase   can   also   be   used   to   create   separate   wireless 
networks in same area and sharing the same frequencies.

The second setting is the country where you want to operate the Videomesh. 
Different   countries   have   different   telecommunications   regulations   and   the 
country setting allows you to operate the Videomesh complying with different 
national regulations.

The available frequencies and other settings related to the radios operation will 
vary based on the selected country.

Picking the wrong country/regulatory domain setting might make the Videomesh 
operations illegal in your country.

Pick the country where you want to operate the Videomesh and save the settings 
before deciding which frequencies to use.

The last setting you can change regards the frequency band used by the two 
radios. Every Videomesh 2200 Series is equipped with two radios, one operating 
in   the   2.4   GHz   range   and   one   operating   in   the   5   GHz   range.   Every   radio 
operates  using a 20 MHz band.  You change the frequency band  in order to 
minimize the interference  with other wireless networks operating in the same 
area.

The frequencies you can select are the carrier frequencies. Not all of them are 
non-interfering because the frequency band used is 20 MHz wide and centered 
at the carrier frequency. 

Router Statistics

The Videomesh Statistics page allows you to check important statistics related to 
the Videomesh.

18

Summary of Contents for Videomesh 2200 Series































Reviews: