• The bandwidth test result will be shown below the test
controls.
Using the Path MTU discovery tool
The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1.
Determine what wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2.
Enter the IP address of the second unit in the
Path MTU
discovery
).
Figure 46. Advanced Tools window (Path MTU test tool)
3.
Click the
Run
button to the right of the IP address field.
• The Path MTU test result will be shown below the test
controls.
6.6. Advanced settings
6.6.1. Advanced radio settings
The advanced radio settings menu item is used to configure the following
wireless parameters:
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 97 of 180