• Show the exact physical positions of all static Fluidmesh
components and approximate physical positions of all mobile
Fluidmesh components, against the background of an aerial map.
Plotting and interpreting static and mobile device information
To plot and interpret information on all static and mobile wireless devices
shown by the window, do the following steps:
1.
Click the
-Fluidity Quadro
link under
NETWORK CONTROL
in
the left-hand settings menu.
NOTE
The Fluidity Quadro window needs Adobe Flash
Player to function. If your browser does not have the
Flash Player plug-in installed, you will be prompted to
download and install the plug-in.
• A graphical view of the current network will be shown. A
typical example is shown in (
Figure 38. Fluidity Quadro graphical view
2.
Within the Fluidity Quadro graphical view:
• Static-mount Fluidmesh radio transceiver devices are
shown as centralized dots.
Mesh End
devices are shown
as
blue
dots, while
Mesh Point
devices are shown as
red
dots. If an abnormal condition is detected on any static
unit, its device icon changes to a
yellow
dot.
• If a mobile radio transceiver device is within range of a
static device, and a data connection is established
between the devices, the mobile device is shown as a
colored border
around the dot representing the static
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 90 of 180