• To show all possible routes of transmission between
wireless devices in a mesh network, check the
Links
check-box.
• To show the current operating frequency of every wireless
link, check the
Frequencies
check-box.
• To show the current data error rate of every wireless
link, check the
Error Rate
check-box.
5.
All Fluidmesh devices represented by dots can be placed in any
position on the map view. To move any dot, click-and-drag the
dot to the needed position.
6.
To save the network layout currently seen on the map view, click
the
Save Layout
button.
7.
If the positions of any device dots have been changed, and the
Save Layout
button has not been clicked, you can restore the
visual network layout to its last saved configuration by clicking the
Load Layout
button.
Using and interpreting the wireless link information display
To show a detailed information display for any wireless link, do the
following steps:
1.
Identify the wireless link for which more information needs to be
known. In the FMQuadro view, Primary wireless links are shown
as double-pointed
solid red lines
. If the network includes mesh
radio links, these are shown as double-pointed
dashed red
lines
. To show all mesh radio links, check the
Links
check-box.
2.
Click the wireless link line.
• The basic wireless link information display will be shown
).
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 83 of 180