1.
2.
Click the
Plug-ins
link.
• The Plug-ins web page will be shown (
Figure 85. Partner Portal (Plug-ins web page)
3.
Check the selection check-box to the left of the relevant plug-in
listing.
• The plug-in control buttons will be shown at the bottom of
the web page.
4.
Enter the unit identification number (
5.a.b.c
) or the unit serial
number of the Fluidmesh unit in the
Mesh ID - Serial Number
field.
5.
Complete the plug-in activation process as shown in
7.2.4. Exporting and uploading multiple Activation codes
If more than one plug-in Activation code must be uploaded to a Fluidmesh
radio transceiver unit at the same time, the need to upload codes one by
one can be avoided by exporting multiple codes, or all codes, from the
Partner Portal as a *.CSV file.
To export a collection of Activation codes from the Partner Portal as a
*.CSV file, do the following steps:
1.
2.
Click the
Plug-ins
link.
• The Plug-ins web page will be shown.
3.
Convert all needed License codes and/or Deactivation codes to
Activation codes as shown in
“Plug-in activation” (page 155)
4.
To export only selected Activation codes, check the selection
check-boxes to the left of each plug-in that must be included in
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 160 of 180
