Fluid FLD4800, Instruction Manual

Page: 19 / 23

19
Troubleshooting
If your television does not operate normally or does not turn on, please check the following
troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs
or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact
Customer Service (refer to Warranty page).
SYMPTOM POSSIBLE CAUSE REMEDY
Dead. No LED light No power to the TV Check all connections to the TV’s
AC socket
Set in Standby mode Press the Power button or the
Standby button on the remote
control
Blue Screen No signal Press SOURCE button to select the
correct source
Incorrect source selected
Noisy, snowy, ghosting picture (TV) Poor antenna signal If using an indoor antenna, try
adjusting the antenna position.
Check antenna connections
No Sound “Mute” is activated Turn “Mute” OFF
Volume set too low Check volume settings
External leads not connected
if used Check that all external leads are
connected properly