6
Assembly Instructions
Adjuster Knob
4x M8x15mm Bolts
and 4x M8 Spring
Washers
3x Foot Leveler
Remove contents from box. Attach telescoping tube to the underside of the control
arm using
4x M8x15mm bolts[5]
and
4x M8 spring washers[16]
.
The control arm is heavy and will swing freely during this stage of assembly.
The adjuster knob is pre-tightened from the factory in the optimal
position for assembly in relation to the control arm. Do not loosen the Adjuster knob
until the telescoping tube has been safely secured to the underside of the control
arm.
Thread the
3x foot levelers[20]
into underside of base. Adjust as required.
CAUTION
