Fluid Management Customer Service 1.800.462.2466
10
| Harbil NSC80 Series
Assembling the Machines
Your Harbil NSC80 Compact Color Dispenser requires only the simple attaching of the individual canisters to
the turntable or fastening to the in-line base. Do not fill the canisters with colorant before they are mounted on
the base.
For In-Line NSC80 Dispensers
1. Place the first canister in position on the in-line base or at the front of the turntable.
2. Screw three 1/4-20 hex-head bolts with rubber washers into the bottom of the canister and after all
three bolts are in place snug them up with a wrench (these bolts and washers are packaged in a
separate bag with the red nozzle caps). DO NOT overtighten the bolts.
3. The canister covers can now be installed on the canisters. (See
IMPORTANT
note in turntable section,
#3.)
For Turntable NSC80 Dispensers
1. Place the first canister in position at the front of the turntable.
2. Depress the index lever and move the turntable to the next position and repeat the above
procedure until all of the canisters are mounted.
3. The canister covers can now be installed on the canisters.
IMPORTANT:
•
The canister covers should be kept on the canisters at all times to minimize the
evaporation and drying of the colorant.
•
Nozzle closers are provided with every canister to help prevent drying of the colorant
and they closed after every use.
