ST51A/ST75A/ST75AV Mass Flow Meters
INSTALLATION
Fluid Components International LLC
21
Table 3 – Power and Signal Wiring Summary
Connector
Pin No.
Function
Description
J8, Signal
1
I
Internal HART connection / 4-20 mA Ch. #1 (+)
2
EXT_HART-
External HART connection (-)
3
INT_HART-
Internal HART connection / 4-20 mA Ch. #1 (-)
E External HART connection (+)
4
4-20 mA Ch. #2 4-20 mA Ch. #2 – default parameter assignment: Temperature
J7, Signal
1
B+
Modbus Data B+ line
2
A-
Modbus Data A- line
3
—
Reserved
4
SINK
Sink Output
5
GND
Return for 4-20 mA Ch. #2 and Source/Sink, and Gnd/Common
for Modbus.
6
SOURCE
Source Output
TB1, AC Power:
85-265 VAC
(CE Mark: 100-240 VAC)
1
AC LINE
AC Line (typical wire color: black or brown)
2
AC NEUTRAL AC Neutral (typical wire color: white or blue)
3
EARTH GND Earth Ground (typical wire color: bare, green or green/yellow)
TB1, DC Power:
18-36 VDC
1
DC+
DC Positive (typical wire color: red or white)
2
DC-
DC Negative (typical wire color: black)
3
EARTH GND Earth Ground (typical wire color: bare, green or green-yellow)
Caution:
To maintain isolation between power input and output signals, keep GND and EARTH GND (chassis ground) separate.
Signal Connections
The J7 and J8 terminal blocks are provided for signal connections. These terminal blocks have 3.5 mm pitch spacing and accept 28 AWG
(min.) to 14 AWG (max.) wires. Observe signal wire routing as described in
4-20 mA Analog Outputs
The instrument is provided with a 4-20 mA current loop as an integral part of the HART signal output and a second 4-20 mA current loop
for general purpose use. Refer to
for the HART loop and general purpose 4-20 mA loop
connector pin assignments. By default Channel 1 (HART) is assigned flow and Channel 2 (general purpose) is assigned temperature. See
also
V Menu: Configure Outputs (4-20 mA and Source/Sink Outputs)
for details on setting up the analog outputs.
Summary of Contents for ST51A
