Fluance DB12, Instruction Manual

Page: 6 / 14

6
Step Four Optional Steps
Connect the power cable to the wall
outlet. Set the power switch to either
ON or AUTO. 1. Attach speaker wire to the speaker
inputs of the subwoofer. Attach same
speaker wire to the channel outputs
of your choice on the home theater
receiver.
Refer to receiver manual for
setup instructions.
2. An additional subwoofer can be
added by connecting subwoofer wire
from the Low Level Output on the
DB12 to the additional subwoofer’s
inputs.
Additional Settings
Volume Setting
The volume setting can be adjusted with the Volume knob located on the back panel
of the subwoofer. The volume setting changes the amplification of the audio signal.
DB12
110Hz
80Hz 120Hz
DB12
110Hz
80Hz 120Hz