5. Calibration
Mode
FF position.
esponding to your Alarm
ondition (it should be as stable as possible).
3.
5.1. Calibration
1. Switch 1 must be in O
2. Induce in the pipe the flow rate corr
c
Turn the potentiometer (
clockwise
) until the led becomes
reen (not necessary if the led is already green).
4.
ise
2
1
g
Turn the potentiometer in the opposite direction (
anti clockw
) until the led turns
d. You must stop turning the potentiometer as soon as the led turns red.
5.
position.
most
uitable switch delay:
ct the 3 second
switch delay
•
select the 10 seconds switch delay
n seconds.
re
Now the Alarm calibration is complete.
5.2. Operative Mode
Switch 1 must be in ON
Switch 2 can be used to select the
s
•
OFF position to sele
ON position to
The electronics recognise switch 2 modification after te
2
1
2
1
K315U – Frequency Output & MIN Alarm
7
