5
To charge your headphone:
Your headphone has been factory pre-charged
and ready for use. Depending on conditions, the first charge might be good for
short time use and in some cases it may need a recharge right out of the box.
When the battery indicator shows a low RED flashing light, please charge the
headphone by putting the micro USB cable included in this package and plug it
into any USB Charging device for at least 2 hours. The red LED will flash during
the charging phase and the blue LED will flash when charging is complete.
Microphone function :
This headphone has a built in microphone as indicated
on the diagram for phone use and will work perfectly when the headphone is on
your head.
3.5mm music line-in function
：
Connect Audio line in cable to 3.5 audio jack for
wired music
3. Pairing (One headphone can connect up to two phone devices ):
Make sure the headphone is power off.
Press and hold the pairing multifunctional button for 5 seconds to enter into the
pairing mode.
The red & blue LED indicator light will flash alternately,
3.5mm Audio Cable
