![background image](http://html.mh-extra.com/html/flowzone/fzvacf-2-5/fzvacf-2-5_operation-manual_2308648010.webp)
Required tools: Phillips head screwdriver
Insert roller handle (12) into the tank , and tighten
the black knobs until the handle is tightly secured.
Hose brackets (5) need to be attached to back of
the tank with screws.
Slide wheels (11) onto axle of the sprayer. Slide
cotter pin through center axle to keep in place.
Place the top wand holster (4) on the molded holster
bracket on the tank. While holding the holster, place
nut on one side of the hexagonal slots and screw
the bolt through the other side until it fastens into
the nut. Repeat for other slot and bottom holster.
Take the spray gun (8) and attach it to the GHT
fitting on the end of the hose (7).
If spraying with the stainless-steel spray wand (6),
pull back on the collar of the quick-connect fitting on
the spray gun. Insert the male wand fitting into the
female spray gun fitting and push the collar back
into its original position. Nozzles can be attached
with the same process.
Snap the spray wand into the wand holster and
place any unused nozzles into their slot until ready
to spray.
A)
B)
C)
E)
F)
STEP 1.
ASSEMBLING YOUR NEW SPRAYER
D)
Copyright © WESSOL, LLC
10
Summary of Contents for FZVACF-2.5
