ATTENTION
Please read the following information carefully. Failure to follow instructions or improper
use could lead to explosive failure causing serious injuries.
After using sprayer with chemicals, it is important to spray with fresh water for 3-5 minutes to ensure residual
chemicals in the gun, wand, tank, pump, and hose are cleaned out. This will extend the life of your sprayer. Never
leave chemicals or solutions sitting in your sprayer after using.
Do not store your sprayer in extremely high temperatures. Heat can lead to the build-up of pressure within the
sprayer, resulting in a possible explosion. If there is pressure in the pump, do not try to remove it with tools.
Do not try to make modifications to the sprayer. Always use FlowZone® branded replacement parts from the
manufacturer.
Never spray flammable, caustic, acidic, chlorine, or other corrosive solutions or heat, pressure, or gas producing
chemicals. Always read and follow chemical manufacturer’s instructions before use with this sprayer as some
chemicals may be hazardous when used with this sprayer.
Only FlowZone nozzles are tested to be compatible with FlowZone® sprayers. Using flow restrictive nozzles could
damage the pump and will void any remaining warranty coverage.
WARNING
This product contains chemicals, including lead, known
to the state of California to cause birth defects and other
reproductive harm.
This product is designed to apply chemicals that may be
harmful and could cause serious personal injury if inhaled or
brought into contact with the user
NOTES:
1. The sprayer may have residual water in it due to quality
testing performed on it.
2. Some parts may be found inside the tank when first
assembling the sprayer. Please make sure to remove the
parts before attempting to assemble or use the sprayer
for the first time.
Copyright © WESSOL, LLC
2
