Copyright © WESSOL LLC
/
9
12
INSTALLATION INSTRUCTIONS FOR ROLLER
1. Begin by inserting the single hole end of the roller handle bar (12)
into the roller base (13).
2. Secure handle bar to base with bolt and nut as pictured.
3. Slide the roller holster (2) onto the middle of the roller handle bar.
4. Use the provided screw to secure the holster to the bar.
5. Slide the roller handle (5) onto the roller handle bar.
6. Secure roller handle to bar with nut and bolt as pictured.
7. Tighten knob on top and bottom of roller bar after adjusting to
desired roller handle height.
8. Place tank on roller base and tighten knob on the back of the
roller base to the tank..
2
3
4
6
7
8
