Flowtron 629601510101, Manual

Page: 4 / 20

4
INSTALLATION
1. Unpack the mosquito trap. Save the carton and fillers. Use them for storage during
off-season months.
2. Choose a sturdy mounting device from which to hang the unit.
3. Plug the electric cord into a earthed electric socket. The bulb will emit a bluish glow
within a few seconds.
NOTE! Bulb may flicker slightly when arc occurs across killing grid. This is normal
operation.
OCTENOL MOSQUITO ATTRACTANT
U.S. Government and university researchers have demonstrated that octenol, a
component of respiration, is effective in attracting many species of mosquitoes. Your
Flowtron Electronic mosquito trap uses an exclusive slow release Octenol mosquito
attractant cartridge (MA-1OOO) which increases the effectiveness of the mosquito trap
to lure mosquitoes into its killing grid.
DIRECTIONS FOR USE AND INSTALLATION
1. Remove the octenol cartridge from the sealed pouch
and peel the protective cover from the face of the
cartridge. Avoid touching the openings in the cartridge
and always wash your hands thoroughly after contact.
2. Place the octenol cartridge inside the bulb retainer at
the bottom of the enclosure (see illustration).
OPERATION
When your mosquito trap is on it will provide the heat and
convective air flow to vaporize the lure and disperse it at
the proper rate per hour for maximum effectivity. For best
results replace the cartridge every 30 days.
Protection cover
Cartridge
Openings
1
Bulb
Cartridge
Mosquito trap enclosure
Bulb retainer
2
ENG