StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
System Requirement
Computer System
The StarTalk
®
DTM has been successfully tested with the following Operating System with a minimum
of 512 M RAM:
•
Windows XP
•
Windows 7
Power Supply
•
The StarPac 3 system is designed to interface with a variety of DCS systems using analog,
discrete, and digital communications.
•
Because of the processing power of the StarPac 3 system, a separate 24 VDC power
connection is required and connected to terminals 1 (+) and 10 (-). This power supply
should have a minimum current capacity of 100 mA.
Communication DTM
•
Schneider Electric Modbus Serial Communication DTM
FRAMES
The StarTalk
®
DTM has been successfully tested in the following FRAME Applications:
•
fdtCONTAINER 3 FRAME Application (Mixed topology support FDT 1.2.x and 2.0 is
required until a new FDT2.0 Comm DTM is available)
System Assumptions
•
The FRAME Application and Communication DTM installed.
•
The Frame application accepts mixed topology (FDT 1.2.x and FDT 2.0)
