2
User’s Guide 2018
General Information
Introduction
This manual covers the theory of operation, installation and field service procedures for
SAFMAG electromagnetic flowmeters supplied with the ACP signal convertor. Should further
support be required, contact your local representative or Flowmetrix SA directly.
Identification
Before beginning installation of the SAFMAG flowmeter, verify that all parameters of the
intended application match those of the flowmeter supplied.
Applications
•
Process control
•
Pump protection
•
Energy consumption and water conservation management
Inspection
Upon delivery the packing case should be inspected for external damage. If damage is evident
this fact must be reported to the carrier immediately and the case should only be unpacked
with a representative of the shipping company present. Check the contents of the case against
the packing slip.
Damaged Parts
Damaged or defective parts should be returned to the supplier prepaid. Do not return goods
until authorisation to do so has been obtained. Returned goods must have accompanying them
a letter stating the following:
•
Your company name and order number
•
The contact person at your company
•
Serial number and name of part
•
Description of damage and cause if known
•
Nature of any repair attempted by the user
•
Type of repair, replacement or adjustment requested
