FLOWMAX Technologies FLOWMAX-120, Instruction Manual, Page: 13 / 88

GENERAL INFORMATION
9
1.2 Product Conformity
All FLOWMAX water heaters are ETL certified and possess technical and functional characteristics that comply with
the following standards:
Gas fired water heaters also comply with the following directives:
Standard(s) –
American National Standard/CSA Standard for Gas Water Heaters Volume III, Storage Water Heaters with Input
Ratings above 75,000 Btu per Hour, Circulating and Instantaneous. Conforms to ANSI STD Z21.10.3, certified to
CSA STD 4.3.
The materials used such as copper, brass, stainless steel, etc. form a compact, uniform, highly functional unit that
is easy to install and simple to operate. In its simplicity, the wall-mounted appliance is equipped with all the
appropriate accessories required to make it a fully independent water heater capable of satisfying domestic hot
water production and central heating needs. All water heaters are fully inspected and are accompanied by a quality
certificate, signed by the inspector, and a guarantee certificate. This manual must be kept in a safe place and must
accompany the water heater at all times.
FLOWMAX Technologies will not be held responsible for any misinterpretation of this manual resulting
from the inaccurate translation of same.
FLOWMAX Technologies will not be held responsible for the consequences in the case of non-observance
of the instructions contained in this manual or in the case where actions not specifically described herein
are undertaken.