7)
Place a provided clamp over the left Y-pipe outlet. Place the exit end of
tailpipe
#16824S
into the stainless exhaust bezel at the bumper and then slide the
expanded end onto the Y-pipe outlet. Connect the hanger on the pipe to the rubber
mount on the vehicle. Tighten the clamp enough to hold, but still allow for adjustment.
8)
Place a provided clamp over the right Y-pipe outlet. Place the exit end of
tailpipe
#16825S
into the stainless exhaust bezel at the bumper and then slide the
expanded end onto the Y-pipe outlet. Connect the hanger on the pipe to the rubber
mount on the vehicle. Tighten the clamp enough to hold, but still allow for adjustment.
9)
Adjust the position of all pipes and mufflers to provide a satisfactory fit. This is a tight fitting system, so
take your time and be patient, tightening and adjusting a little bit at a time. Be sure to maintain an adequate
clearance around all parts of the system to avoid rattles or damage to heat sensitive components. Once you’re
happy with the fit, tighten all connections down securely. For a cleaner appearance and more secure
installation, we highly recommend welding all slip-fit connections.
PACKING LIST
Qty
Description
Part#
1
Inlet Pipe
570TBS
1
Muffler
12414310-Z
1
Mid Pipe
16820S
1
Y-Pipe Assembly
16821S
1
Left Tailpipe
16824S
1
Right Tailpipe
16825S
1
Parts Kit
PK651
5
2¼” Band Clamp
MC225BS
5
1/2” Hanger Keepers
HW503
