1) Use scissors to cut out this template along the lines.
2) Align the template on the bumper by matching up the
contours of upper body line and the bottom edge of the
bumper valance. Tape the template in place.
3) Use a paint pen or silver marker to mark the contour
onto the valence. Remove template after marking.
4) Use a jigsaw, sawsall or die grinder to carefully cut
along the contour. Use a file to clean up the edges
after cutting.
#817518 - MUSTANG V6
BUMPER CUT-OUT TEMPLATE
INTERNAL REF 9.00”
ALIGN
WITH BOD
Y LINE
ALIGN
WITH BOD
Y LINE
