MN300262 Rev B
31
|
Appendix (continued)
Step
Nine
TOP-LEVEL MENU DESCRIPTIONS (CONTINUED)
RUN
– Returns the unit to normal measurement and control mode.
SETUP:
Setup
w
ill display setting for all functions of EchoSwitch®. Use this feature to confirm the configuration of the
sensor.
1. In TOP-LEVEL MENU, select HELP.
2. Select
SETUP.
3. Setup will list the following settings:
a.
UNITS, HEIGHT, FILL_H, RELAY1*,
RELAY2*, RELAY3*.
b. * Each relay will list the following settings:
i. Relay Function, On Setting, Off Setting,
Safe Setting and Delay
4. Select EXIT to return to TOP-LEVEL MENU.
RESET:
Reset enables the entire sensor or specific relays to be reset to factory settings.
1. In TOP-LEVEL MENU, select HELP.
2. Select
RESET.
3. Select R ALL, RST 1, RST 2 or RST 3.
a.
R All
– Resets the entire EchoSwitch®
b.
RST R1
– Resets only the settings
associated with Relay 1
c.
RST R2
– Resets only the settings
associated with Relay 2
d.
RST R3
– Resets only the settings
associated with Relay 3
4. Select EXIT to return to TOP-LEVEL MENU.
