8 of 24
MN300480
Rev A1
GETTING STARTED (continued)
Step Five
With EchoSonic® II connected to your computer, open the WebCal®* software by clicking on the WebCal®
icon. Follow steps 1‐4 to configure the transmitter. Click “Help” in the lower right hand corner and open the
help menu of WebCal® for additional instructions on WebCal®. If you need additional assistance using
WebCal®, please contact a Flowline applications engineer at (562) 598‐3015.
* For complete information on
the WebCal® software, please refer to the WebCal® manual located at www.flowline.com/webcal‐software.
Configuring EchoSonic® II with WebCal®
1.
Sensor Configuration
a.
Configures the Loop Fail‐Safe, Output at Empty and Startup condition for the sensor.
2.
Tank Shape Selection
a.
Defines the shape of the tank as well as the dimensional information for the tank with respect
to the sensor’s location on the tank.
3.
Tank Level Configuration
a.
Enter the settings for the relay activation points as well as confirm the operational range.
4.
Write to Unit
a.
Uploads configuration into the sensor.
b.
Access to a customer wiring diagram specific to the relay configuration.
Sensor Configuration:
