31 MAR 11
EchoPod
13 of 29
Rev B
MN204210
Relay Fail-Safe
This feature allows you to select the fail-safe state for the relays.
When the sensor regains signal, the output current will revert back to
the current level condition.
o
Relays Off
- The relays will revert to the OFF state. Appears
when
Switch/Alarms Only
is selected.
o
Relays On
- The relays will revert to the ON state.
Appears when
Switch/Alarms Only
is selected.
o
Hold State
-
The relay(s) will remain in the same state as the
last echo detected. When the sensor regains signal, the relays
will revert to the level when the signal was regain.
o
Pump/Valves Off
- The relays will revert to the OFF state.
Appears when
1-Pump/Valve
or
2-Pumps/Valves
are
selected.
o
Pump/Valves On
- The relays will revert to the ON state.
Appears when
1-Pump/Valve
or
2-Pumps/Valves
are
selected.
o
Not Applicable
–
Appears when this function is not available
(such as when
Transmitters Only
are selected).
Note:
Right click on any menu that you may have questions on to open the help menu.
Note:
To reset, press the Clear Screen button.
