FLOWFITNESS Stelvio Racer M, Manual

Page: 41 / 52

Manual Prestige Stelvio Racer m - 41
4. Use
Get started
The values TIME, DISTANCE, CALORIES, PULSE can be set in advance. If these are not set,
the training value will increase.
1. Once the CR2032 3V battery is placed, the screen will display drawing A. and will beep
at the same time. Thereafter the screen wil show the main menu, drawing B.
Drawing A. Drawing B.
2. To enter the desired value, press MODE until the desired value flashes. Press SET to
adjust the value and press
MODE
again to confirm.
3. When you start a training without setting a desired value, the value of TIME, DISTANCE,
and CALORIES will count up. If a value is preset by you, this value will decrease to zero
when you start exercising. Once the value reaches zero, the computer will beep for 8
seconds.
4. Press MODE to reset all values to zero.
5.
When the computer is in SCAN mode, the values TIME, DISTANCE, CALORIES, PULSE,
and RPM/SPEED will alternate on the display every 6 seconds.
If the training is stopped for at least 4 minutes, the computer will go into stand-by. To turn
the computer back on, you can press both the
SET button or the MODE/RESET button.