Self-erecting portable greenhouses
Page 1
Step 1:
To take down your
SpringHouse™ begin by removing
all high-wind tie-downs and
stakes. It may be easier for you to
use the head of one stake to
remove another. Shown above.
Step 2:
Untie the straps holding
the L-shaped fiber poles in place.
Move them to one side. This will
relieve some tension.
Step 3:
Step on the skirting just
under the pockets to remove the
L-shaped fiber poles.
Step 4:
Remove the L-shaped
fiber poles from the X-shaped fiber
pole at the ceiling. (Shown in
"D") Then remove the L-shaped
fiber poles from the ceiling. Step
outside and zip the doors shut.
Step 5:
Tip your SpringHouse™ over. NOTE: It will not lay flat.
Push firmly on the center band to spring it back into place so your
SpringHouse™ will fold inward.
Step 5:
Fold your SpringHouse™ in half, from 2 panels
to one.
As shown in photos "7& 7a".
Summary of Contents for SpringHouse
Page 1: ......
