How to use lever tool
(used for assembly assistance)
Place the peg of the curved end of
lever on the inside middle of the pan,
with the peg of the straight bar on the
outside.
Pull the straight bar towards the outer
rib of the chair.
This will create the clearing necessary
to insert bolts and wedges into posi-
tion.
Place bolts, fasten with nuts, and
follow by inserting wedges in
between outermost rib and bolt.
Flip lever tool to repeat on other side,
top and bottom.
- PO Box 595 Clio, MI 48420 - Office: (810)686-8252 - Fax: (810)686-5492 - www.flowerhouses.com -
Images are not to scale
Before starting assembly, unpack entire contents of box and check that all parts are accounted for.
Contact FlowerHouse for any replacement or repair issues:
(810)686-8252 - [email protected]
