DYNAMIC BALANCED
TEMPERATURE CONTROL VALVE
FlowCon ABM
1M95000ISO
-
04/2016
FlowCon International assumes no responsibility
for mistakes, if any, in any printed material.
Denmark
Dubai
USA
Singapore
- 6 -
General
It is recommended flushing the system before
installing the insert in the valve body. Suitable
flushing caps are available. Water must always
be suitable treated, clean and free of debris. It is
recommended that a strainer be installed prior to
the valve body to prevent damage or blockage
due to debris. Ensure that the valve is not in the
fully closed position when filling the system with
water. Further it is recommended not to exceed
maximum differential pressure control range for
the insert, paricularly for the diaphragm type.
Warranty obligation
Failure to abide by all recommendations as per
this installation and operation instruction will void
warranty.
