www.flowair.com |16
5.3. ELIS DUO CONTROL SYSTEM
Power supply 230V/50Hz
Air curtain section fan power supply
Unit heater section fan power supply
Valve actuator
Air curtain control panel
Unit heater control panel
Master / Slave connection
Signalize led:
Power supply (red)
Air curtain step (green)
Unit heater step (green)
Valve actuator operating (green)
Switches :
S4
– Valve operating time delay;
S2
– Idle speed;
S1
– Idle speed time delay;
S3
– Operating mode;
F1
– Fuse 1,6A;
PROGRAMMING STEP BY STEP:
1. Choose operating mode DUO 1 or DUO 2 (S3)
2. Choose controllers
3. Set (depending on needs) additional settings (S1, S2, S4)
ATTENTION:
*DUO 1
- main signal (turning on unit) from TS or DCe/DCm;
**DUO 2
- main signal (turning on unit) from DCe/DCm;
***Multiply settings on S1, S2, S3, S4 from Master unit.
