2
EN INSTRUCTION MANUAL
Dry&Clean Mode (30 min)
The
Dry&Clean
mode is an automatic program and combines fast drying with
an efficient fan with UV-C light at the beginning and end of the drying time
for perfect hygiene.
Clean Mode (1 min)
The
Clean
Mode is a short-term hygiene program and starts the optimized
UV-C light, which effectively eliminates up to 99.9% of germs, bacteria and
fungi present in the household.
Using first time
1. Plug the USB cable into a USB socket of the dual-port USB power supply and the round plug into the socket on the back of your dry-cap uv®.
You can plug the USB cable of the charging station into the second USB socket.
2. Then plug the power supply unit into a mains socket.
i
The dry-cap uv® is ready to use
Operation Dry&Clean Mode (30 min)
3. Place the dry-cap uv® with the acrylic hood over the charging station with the rechargeable hearing aids.
4. Press the left button (
Dry&Clean
mode) and the care program ( UV-C) starts automatically.
• The fast drying by fan is controlled by a microprocessor and runs for 30 min.
i
LED permanent light
• Ultraviolet light (253,7 nm) eliminates germs and bacteria to 99.9% within 1 min
i
LED blink light
• After 1 min the UV-C light switch off automatically, the drying process continues
i
LED permanent light
• Within the last minute of the 30 min drying program, a second UV-C hygiene runs
i
LED blink light
• After 30 min the dry-cap uv® automatically shutdown to stand-by
i
LED switch off
Drying and hygiene are complete, the charging of the hearing aids in the charging station continues and can remain under the dry-cap uv®
after the charging station is switched off.
5. Lift the dry-cap uv® up and off next to the charging station. Remove the dried and hygienically cleansed hearing aids from your charging station.
