Flow Controller Systems FCS PDS II, Product Manual, Page: 13 / 23

- 10 -
display
s
the average volume
. C
lick „Calibration‟ button
.
Di
splay
calibration
successful.
D
-
Test again to check whether the dispensing volume
meet
s requirements
. If higher accuracy
is needed
, you can use the
adjust function
. C
lick
the
„Add‟ or „Dec‟ button
to
micro
-
adjust
the dispensing volume
to
meet high accuracy dispensing.
E
- Click
ing the
„Cancel‟ button cancel
s
the tests
. A
ctual filling
volume return
s
to 0.
8
-
Logic working mode checking interface
Logic working mode checking interface
table:
In the running state of the allocation mode, click on the
running bottle at the main interface to enter this interface
. I
n
this interface
, you
can view the unit
's
system parameter
setting
s
and detailed allocation parameters. Click
ing
on
the micro increase
or
micro decrease button
s
, you can adjust
the currently running allocation group of this unit. Click on
the exit button
takes you b
ack to the main interface.
9
-
Full speed interface
Full speed interface shown below
PDS II