MANUAL
1
New features
1.
Locking machine
2.
Programming
3.
Reminder (technical Level)
1. Locking Machine
The control panel can be locked
to prevent setting changes by unauthorized persons
.
Touch
on the home screen to enter the lock code.
Choose
Lock/unlock machine
and enter the code “
1-2-3
”.
Touch
to confirm and return to the start screen.
Touch
to return to the start screen without the lock
function.
Change Lock code via Technican Level:
ATTENTION:
The loss
of the lock code can only be remedied by re-installing the
software, which is a cost-intensive process that can only be
fixed by a technician on site or by sending the machine to our
factory.
This is NOT covered by the warranty.
(Tel.:07150/ 92396-0,
www.floeter.com/support/)
A small icon of a padlock indicates that the control panel is
locked.
In this state, it is only possible to
Insert film
, start air cushion production
and
stop
.
Temperature, air volume or production length cannot be
changed. For this, the control panel must be unlocked
again. Touch "SET" enter the code and touch "ENT" to
confirm and return to the start screen.
