FloTech FT555F Automatic Overfill System Tester
FT555F Truck Tester 10784PA REV C Page 3
Introduction
This Manual describes the features, use and maintenance of the
FT555F Automatic Overfill System Tester. The FT555F is
compatible with all makes of Optic sensor systems, 2 wire
Thermo-Optic systems, and truck onboard monitor systems
regardless of manufacture as long as they are compatible with API
RP1004: 2003 recommended practice.
Main Features
The FloTech FT555F Automatic Overfill System Tester has the
following features:
-
Automatically test all 4 test functions, Optic, Thermistor,
Ground Bolt, and TIM number.
-
Test all API 5 wire optic sensor systems and report the
number of functional / wetted sensors.
-
Test 2 wire Thermo–Optic sensors and report the number
of functional / wetted sensors.
-
Monitors up to eight compartments.
-
Test Ground Bolts with both forward and reverse continuity
check.
-
Read TIM modules and report serial number in display
-
Has “WET TEST” mode with alarm to report when sensors
are wetted.
-
Set up screen to configure which of the four tests are
enabled and will configure maximum number of
compartments by region.
-
Software can be upgraded to include new tests and future
expanded testing and troubleshooting capability.