Installation
4
ABOUT INSTALLATION
Please use the convenient, water resistant,
“Installation
Instructions”
card.
Step 1: Install vacuum port door fitting
If there is no spring-loaded door on the vacuum port,
install the included cover.
If you pool only has a skimmer, and no dedicated vacu-
um port, proceed to Step 2.
1. Screw the fitting into the port opening.
2. Orient the fitting so the arrow on the door points up.
3. Secure the cover by tightening the allen-screw below the
door.
Step 2: Straighten hose (Figure 2)
Remove and uncoil the hose from the carton. Lay it out
in the sunlight, flat and straight.
Step 3: Check parts (Figure 3)
• Cleaner assembly
• Black plastic swivel assembly
• Handle adapter
• White rubber reducer cone
• Hoses: 20’, 8’ and 4’
• White plastic vacuum regulator
• Cap for regulator
• Vacuum port fitting
• Flow gauge
Step 4: Clean filter system (Figure 4)
Backwash and clean filter; rinse; clean all baskets, etc.
Start pump.
For parts or assistance, call Flotec Customer Service at
1-800-365-6832
1882 0795
Figure 2
Re
g
ulator
Re
g
ulator
Cap
Swivel
Ass'y
Reducer
Cone
Vacuum
Port
Flow
Gau
g
e
Hose
Handle
Cleaner
1902 0795
8
'
20'
4'
M
AX
IM
UM
FL
OW
M
IN
IM
UM
FL
OW
Figure 3
1880 0795
Figure 4
Figure 1
