Parts Breakdown for FP 747
Replacement Parts for FP 747
FP 747
3/8” Pistol Impact
Limited Warranty
Florida Pneumatic warrants its tools to be free from defects in material and workmanship for two
years from the date of purchase. This warranty does not apply to tools which have been abused,
misused, modified or repaired by someone other than Florida Pneumatic or its authorized service
centers. If a Florida Pneumatic proves defective in material of workmanship within two years after
purchase, return it to any authorized service center or to Florida Pneumatic, freight prepaid. Please
enclose your name, address and adequate proof of purchase date with a brief description of the
defect. Florida Pneumatic will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period.
Florida Pneumatic's sole liability and your exclusive remedy under this warranty is limited to repair or
replacement of the defective tool. There are no other warranties expressed or implied and Florida
Pneumatic shall not be liable for incidental, consequential or special damages, or any other damages,
costs or expense of repair or replacement as described above.
USE ONLY IMPACT SOCKETS & ACCESSORIES
Sockets and accessories used shall be of the impact socket type. Always check sockets,
retainers and drives regularly for wear or damage and replace whenever necessary
Drive size...........................................................................................................................3/8"
Free speed (No load).........................................................................................12,000 RPM
Impacts per minute.............................................................................................1,750 IPM
Torque range...................................................................................275 Ft. Lbs. @ 90 psi
Bolt Capacity....................................................................................................................5/8”
Weight........................................................................................................................2.6 lbs.
Overall length..................................................................................................................6.0"
Average air consumption.........................................................................................4 CFM
Recommended hose size.....................................................................................3/8" I.D.
Air inlet.....................................................................................................................1/4" NPT
Maximum operating pressure.................................................................................90 psi
Ref. Description Part #
Ref. Description Part #
FP 747
3/8” Pistol Impact
1
Air Inlet
9287605
2
Dowel Pin
9287606
3
O-Ring
9287607
4
O-Ring
9287608
5
Deflector
9287609
6
Spring
9287610
7
Valve Stem
9287611
8
Valve Seat
9287612
9
Washer
9287613
10
Retainer Ring
9287614
11
Spring Pin
9287615
12
Spring Pin
9287616
13
O-Ring
9287617
14
Trigger
9287618
15
Power Management Knob 9287619
16
Spring
9287620
17
Steel Ball
9287621
18
Bolt (4)
9287622
19
End Cover
9287623
20
Gasket
9287624
21
O-Ring
9287625
22
O-Ring
9287626
23
Valve Body
9287627
24
Lock Washer
9287628
25
Screw
9287629
26
O-Ring (2)
9287630
27
Connecting Pipe
9287631
28
Composite Motor Housing 9287632
29
Ball Bearing
9287633
30
End Plate
9287634
31
Guide Pin
9287635
32
Blade (6)
9287636
33
Rotor
9287637
34
Cylinder
9287638
35
Front Plate
9287639
36
Ball Bearing
9287640
37
Gasket
9287641
38
Hammer (2)
9287642
39
Hammer Cage
9287643
40
Hammer Pin (2)
9287644
41
Anvil
9287645
42
O-Ring (2)
9287646
43
Socket Retainer
9287647
44
Bushing
9287648
45
Hammer Case Magnesium
9287649
46
Spring Pin
9287650
