FUV 2000 A1
■
12
│
GB
│
IE
THERMAL WEED KILLER
FUV 2000 A1
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as de-
scribed and for the specified areas of application.
Please also pass on these operating instructions to
any future owner.
Intended use
The appliance is suitable for the removal of wild
growth between paving slabs, on brick-paved are-
as, on walling, in flowerbeds and in lawns during
the growth periods, for the removal of paintwork,
for heating (e.g. of heat-shrinkable tubing) and for
the deformation and welding of plastics. It can also
be used for separating glued joints, thawing frozen
pipes and lighting barbecues. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance
is not intended for commercial use.
Features
Ergonomic handle
Strain relief
Power cable
ON/OFF switch
Air intake opening
Stand
Housing with heating element and ventilator
Heat shield
Cone nozzle
Spatula nozzle
Flat nozzle
Reducer nozzle
Barbecue nozzle
Package contents
1 thermal weed killer FUV 2000 A1
1 cone nozzle (pre-fitted)
1 spatula nozzle
1 flat nozzle
1 reducer nozzle
1 barbecue nozzle
1 stand
Mounting screws
1 set of operating instructions
Technical data
Rated voltage:
230 V ~ 50 Hz
(alternating current)
Rated input power:
2000 W
Temperature
(nozzle outlet):
approx. 650 °C
Protection class:
II /
(double insulation)
Summary of Contents for FUV 2000 A1
Page 3: ...11 12 13 8 9 10...
Page 4: ...B A...
Page 24: ...FUV 2000 A1 20 GB IE...
Page 54: ...FUV 2000 A1 50 CZ...
