FLORABEST FRMA 36/1 A1, Translation Of The Original Instructions

Page: 10 / 52

10
GB IE
hole clean and clear. Remove
cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment
that is damaged, incomplete, or
has been modified without the
authorisation of the manufac-
turer. Do not use the equipment
with damaged safety devices or
screens or with missing safety
equipment such as deflection
and/or grass collection devices.
• Do not overload the equipment.
Work only within the speci-
fied power range and do not
change the regulator settings on
the motor. Do not use low-pow-
ered machines for heavy work.
Do not use your equipment for
purposes other than those for
which it is designed.
• Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
• Do not lift or carry the equip-
ment when the motor is running.
• Switch the device off, remove
the safety key and take out the
battery. Make sure that all mo-
vable parts are stationary:
- whenever you leave the
apparatus unattended and
when it is not being used,
- before removing obstructions
or loosening blockages from
the discharge chute,
- before checking or cleaning
the apparatus or performing
any work on it,
- when a foreign object has
been hit by the apparatus.
Check for damage to the
apparatus and carry out the
necessary repairs before
switching it on again and
working with it,
- if the apparatus starts to vi-
brate excessively, an immedi-
ate check is required.
- make sure that all nuts, bolts
and screws are properly tight-
ened.
- inspect the apparatus for any
damage.
- have any necessary repairs
carried out to damaged
parts.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during sickle mowing.
• Always pull the circuit breaker/
ignition key if:
- you leave the apparatus
unattended, before clearing
blockages,
- if you check or clean the ap-
paratus or work on it,
- after a collision with a for-
eign object. Immediately
examine the device for dam-