15
CHARGING THE BATTERY
Follow the procedure below:
Use only the Charger supplied by the Manufacturer. Any damage or malfunction caused by
the use of Chargers other than those supplied by the Manufacturer shall not be covered by
the Warranty.
1
Insert the plug of the power cable of the Charger
into a 230 volt power outlet.
2
Plug the Charger connector into the socket located
below the Battery.
The correct charging of the battery will be signaled by the intermittent lighting of one of the
LEDs positioned on the membrane and by the lighting of the red light on the charger.
When the battery is fully charged, the red light on the charger will turn green.
In case of overheating during the charging phase, the battery will automatically suspend
the charge. Once the correct temperature has been restored, the Battery will automatically
resume the charging phase.
Make sure the battery is off before performing any operations
