background image

12

  PACKAGING SPECIFICATIONS AND DIMENSIONS

The FB25 machine is delivered in a protective 
packaging. Ensure that the packaging is fully 
intact and that there are no signs of tempering 
when the product is taken over. In case of damage, 
the customer shall notify our customer service 
immediately. 

                                                                       
                                                                        

  MACHINE UNPACKING

Follow the procedure below:

1  Place the packaging on the floor/work table softly by laying it down on the right part.

2  Open the external cardboard by using a pair of scissors, when necessary. (Do not use an utility 

knife).

3  Remove the machine body, tank and extensible tube, and place them on the floor softly.

4  Keep the cardboard box and its components away from sources of heat, in a dry and easily 

accessible place.

Do not break or throw the packaging and its components away so that it can be used 
again for future transportation.
For your safety, wear protective gloves when carrying out these operations, in order to avoid 
injuries in case of accidental contact with sharp edges of the cardboard box, direct contact 
with detergent residues or metal edges.

35

80

31

Summary of Contents for FB25

























Reviews: