VERTIGRIND 270 MANUAL &
PARTS LISTING
1800 FLOOREX
1800 356 673
PAGE
4.
OPERATING INSTRUCTIONS
1.
When using the VERTIGRIND 270 on a wall or vertical
surface Ensure the load balancer is adjusted correctly. Use
a load balancer suspended from a certified anchor point at
the top or above the top of the wall. This takes all the
weight of the machine and when adjusted correctly it
should take very little force to move the machine up the
wall.
2.
Wear clothes suitable for the job and for the work place
including, safety shoes, hard hat, hearing protection, non
fogging vented safety goggles, and dust respirator suitable
for dust.
2.
WARNING!
POISONOUS EXHAUST GASES. Do not
operate petrol powered equipment without adequate
ventilation. Carbon monoxide is an invisible odorless gas
that can harm or can kill you.
3.
All equipment must be tested and tagged prior to use on
any job.
4.
Inspect entire area to be ground before grinding and
remove any bolts or concrete nails (etc) that could damage
diamond tooling or machine and which could cause a
hazardous situation.
5.
Ensure there are no obstacles or existing structures that
could present a hazard to the operator. If so, take
necessary action to eliminate the hazard.
6.
Disconnect unit from all power sources.